Instron 68TM-5 - Page 13

13
Product Support: www.instron.com
Chapter 1
Introduction
• System Description and Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• System Safety and Information Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
• Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
These instructions include the following information:
• system specifications that are required for installation of your testing system, for
example required environmental conditions, system weights and dimensions
• transporting your system to its final location, including instructions for lifting and
handling
• system performance specifications for this frame model
Refer to the Operator’s Guide for instructions on connecting system components,
system configuration, running tests, and performing routine maintenance of the system.