31
68TM-5 Power Requirements and Cords
Product Support: www.instron.com
You must use GFCI (Ground Fault Circuit Interruption) protection on all power
sources if your testing system includes water or any other fluid.
If your system includes any fluids (e.g. water-cooled grips, BioPuls baths, food testing
fixtures), you must use GFCI protection on all power sources to protect the operator from
fluids that might leak into the load frame electronics.
Power cord selections
If you do not make a choice, Instron
®
chooses the customary power cord that matches
the shipping destination for the system.
Table 6. Power cords
Power cord designation Matching receptacle Locale
P1 USA and Canada
P2 Denmark
P3 Europe
P4
and
Italy
To Next Page
Loading...
