Chapter: Requirements
34 M10-17416-EN
• Floor area along the pathway to the final site location is able to support the weight of
the frame and forklift (or crane).
Refer to “68TM-5 Dimensions and Weight” on page 35 for dimensions and
weights of the testing system with and without its packaging. Refer to “68TM-5
Packaging dimensions and weight” on page 53 for dimensions and weights of
the packaged system.
• There are no loose accessories on the shipping skid or frame.
• Your equipment operators have the appropriate licenses and have complied with
your local safety standards (i.e. the appropriate training required by OSHA in the
U.S.).
Scheduling installation
When the testing site is ready, and the frame has been moved to its final operating
location, contact Instron
®
to schedule an installation appointment.
A list of Instron
®
offices is available on our website at www.instron.com.
In the United States and Canada, you can call 1-800-473-7838.
To Next Page
Loading...
