Integra DTC-9.8 User Manual

117
Zone 2 and Zone 3 —Continued
Selecting an Input Source for Zones
Notes:
•To select AM or FM, press the [Tuner] input selector
button repeatedly. On the North American model, you
can also select XM or SIRIUS.
• Only analog input sources are output by Zone 2 and
Zone 3. Digital input sources are not output. If no
sound is heard when an input source is selected, check
to make sure it’s connected to an analog input.
• While Zone 2 or Zone 3 is on, the Auto Power On/
Standby and Direct Change functions do not
work.
•You cannot select different AM or FM radio stations
for your main room, Zone 2, and Zone 3. The same
AM/FM radio station will be heard in each room.
• On the North American model, you can select a differ-
ent radio source for each room. For example, XM for
your main room, SIRIUS for Zone 2, and AM/FM for
Zone 3.
Turning Off Zones
1
On the remote controller, press
the [Zone 2] or [Zone 3] Remote
Mode button.
On the AV controller, press the
[Zone 2] or [Zone 3] button.
The Zone 2 or Zone 3 indicator flashes,
and the input selector currently selected
for the zone appears on the display.
2
On the remote controller, use the
Input Selector buttons.
On the AV controller, use the
input selector buttons, or press
the [Zone 2] or [Zone 3] button
repeatedly
The input source is selected, the zone is
turned on, the name of the input selec-
tor appears on the display, and the
Zone 2 or Zone 3 indicator lights con-
tinuously.
Zone 2
Zone 3
AV controller
Remote
controller
+10
123
456
789
VCR / DVR CBL / SAT
DVD
Tape
Tuner
CD
Phono
Game / TV
AUX 1 AUX 2
AV controller
Remote
controller
1
On the remote controller, press
the [Zone 2] or [Zone 3] Remote
Mode button.
On the AV controller, press the
[Zone 2] or [Zone 3] button.
The Zone 2 or Zone 3 indicator flashes.
2
On the remote controller, press
the [Standby] button.
On the AV controller, press the
[Off] button.
The zone is turned off, and the Zone 2
or Zone 3 indicator goes off.
Zone 2
Zone 3
AV controller
Remote
controller
Standby
AV controller
Remote
controller
DTC-9.8En.book Page 117 Friday, February 15, 2008 1:23 PM

Integra DTC-9.8 Specifications

General

Brand	Integra
Model	DTC-9.8
Category	Controller
Language	English