Integra DTC-9.8 User Manual

17
Remote Controller —Continued
For detailed information, see the pages in parentheses.
A Standby button (45)
Sets the AV controller to Standby.
B
On button (45)
Turns on the AV controller.
C
Input Selector buttons (61)
Used to select the input source.
D
Macro buttons (125)
Used with the Macro function.
E
Dimmer button (82)
Adjusts the display brightness.
F
Arrow [ ]/[ ]/[ ]/[ ] and Enter buttons
Used to select and adjust settings.
G
CH +/– button (81)
Selects radio presets.
H
Setup button
Used to change settings.
I Display button (83)
Displays information about the current input source.
J
Listening Mode buttons (85)
Used to select the listening modes. The [Stereo],
[Surround], and Listening Mode [ ]/[ ] buttons
can be used at any time, regardless of the currently
selected remote controller mode.
K
Test Tone, CH Sel, Level–, and Level+
buttons (82, 103)
Used to adjust the level of each speaker.
L
Light button
Turns the remote controller’s illuminated buttons on
or off.
M D.TUN button (63)
Selects the Direct tuning mode for radio.
N
Remote Mode buttons (16)
Used to select the remote controller modes. When
you press a button, the Remote Mode button for the
currently selected mode lights up.
O
Sleep button (83)
Used with the Sleep function.
P
VOL [ ]/[ ] button (61)
Adjusts the volume of the AV controller regardless
of the currently selected remote controller mode.
Q
Return button
Returns to the previous display when changing set-
tings.
R
Muting button (82)
Mutes or unmutes the AV controller.
S
Re-EQ button (94)
Turns the Re-EQ function on or off.
T
L Night button (94)
Turns the Late Night function on or off.
U
Audio Sel button (84)
Selects the audio input: analog, digital, HDMI, or
multichannel.
■ TAPE mode
On twin cassette decks, only Deck B can be controlled.
1 Previous and Next [ ]/[ ] buttons
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [ ] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [ ]/[ ] buttons may not work prop-
erly with some cassette tapes.
Play [ ] button
Starts playback.
Rewind and Fast Forward [ ]/[ ] buttons
The Rewind [ ] button starts rewind. The Fast
Forward [ ] button starts fast forward.
Reverse Play [ ] button
Starts reverse playback.
Stop [ ] button
Stops playback.
Rec [ ] button
Starts recording.
DTC-9.8En.book Page 17 Friday, February 15, 2008 1:23 PM

Integra DTC-9.8 Specifications

General

Brand	Integra
Model	DTC-9.8
Category	Controller
Language	English