Integra DTC-9.8 User Manual

57
First Time Setup —Continued
❑ Speaker Detect Error
This message appears if a speaker is not detected. “Yes”
means that a speaker was detected. “No” means that no
speaker was detected. Check your speaker connections
and retry, or cancel the automatic speaker setup.
One of the front speakers has not been detected.
The surround right speaker has not been detected.
The surround back left speaker has not been detected.
There is a problem with the front left speaker. If the
warning triangle ( ) appears for the subwoofer, it may
be that the output from the subwoofer is too loud.
A different number of speakers has been detected.
❑ Writing Error
This message appears if saving fails. Try saving again, or
cancel the automatic speaker setup.
If this message appears repeatedly, the AV controller
may be malfunctioning and you should contact the
dealer from whom you purchased this unit.
Auto Speaker Setup
Retry
Cancel
Speaker Detect Error
:Yes
:---
:Error
:No
Auto Speaker Setup
Retry
Cancel
Speaker Detect Error
:Yes
:---
:Error
:No
Auto Speaker Setup
Retry
Cancel
Speaker Detect Error
:Yes
:---
:Error
:No
Auto Speaker Setup
Retry
Cancel
Speaker Detect Error
:Yes
:---
:Error
:No
Auto Speaker Setup
Retry
Cancel
Speaker Detect Error
:Yes
:---
:Error
:No
Auto Speaker Setup
Retry
Cancel
Speaker Detect Error
Auto Speaker Setup
Writing Error!
Retry
Cancel
DTC-9.8En.book Page 57 Friday, February 15, 2008 1:23 PM

Integra DTC-9.8 Specifications

General

Brand	Integra
Model	DTC-9.8
Category	Controller
Language	English