Display
1 Lights in the following conditions� "Z2": Zone 2 output
is on� / "HDMI": HDMI signals are input and HDMI
input selector is selected� / "ARC": Audio signals are
input from ARC compatible TV and TV input selector
is selected� / "3D": Input signals are 3D� / "USB" ():
When input is "NET" and USB is connected and
selected� / "NET" (): "NET" input is selected and
the unit is connected to the network� / "DIGITAL":
Digital signals are input and the digital input selector is
selected� / Cursor indicators: NET or USB is controlled�
¼ "USB" and "NET" will flash if the connection is not correct�
2 Stays lit when headphones are connected�
3 Lights when playing NET or USB�
4 Lights according to the type of input digital audio signals
and the listening mode�
5 Stays lit when Music Optimizer is enabled�
6 Lights in the following conditions� "AUTO": Tuning mode
is auto� / "TUNED": Receiving AM/FM radio�
flashes while tuning is automatically performed� / "FM
STEREO": Receiving FM stereo� / "RDS" (Australian
models): Receiving RDS broadcasting�
7 Flashes when muting is on�
8 Lights in the following conditions� "SLEEP": Sleep timer
has been set� / "ASb" (Auto Standby): Auto Standby
is on� / "ch": Channel is being set� / "Hz": Crossover
frequencies are being set� / "m/ft": Speaker distances
are being set� / "dB": Speaker volume is being set�
9 Displays various information of the input signals�
Pressing Display displays the type of input digital signals
and the listening mode�
To Next Page
Loading...
Need help?
General
