Integra DTR-20.7 - Checking the Input Format

Using the Listening Modes
En-26
Input Format Listening Mode
DTS-HD MSTR Direct
DTS-HD MSTR
1 2
Dolby Surround
Game-RPG
3
Game-Action
3
Game-Rock
3
Game-Sports
3
All Ch Stereo
4
Full Mono
4
T-D
1
Cannot be selected when the input format is monaural or 2 ch�
2
Center speaker or surround speakers need to be installed�
3
Surround speakers or height speakers need to be installed�
4
Center speaker, surround speakers or height speakers need to be
installed�
Input Format Listening Mode
DTS-ES Direct
DTS
1
ES Matrix
2
ES Discrete
2
Dolby Surround
3
Game-RPG
4
Game-Action
4
Game-Rock
4
Game-Sports
4
All Ch Stereo
5
Full Mono
5
T-D
1
Can only be selected when the back speakers are not installed�
2
Back speakers need to be installed�
3
Height speakers need to be installed�
4
Surround speakers or height speakers need to be installed�
5
Center speaker, surround speakers or height speakers need to be
installed�
¼ Stereo button
You can select a listening mode for stereo and all channel
stereo sources�
Input Format Listening Mode
All format Stereo
All Ch Stereo
1
1
Center speaker, surround speakers or height speakers need to be
installed�
Checking the Input Format
While audio from the player is being input, press Display on
the remote controller several times to switch the information
shown on the main unit display� For example, if "Dolby D
5�1" is displayed, the Dolby Digital 5�1 ch signals are being
input�
● The number of channels is not displayed when the input
signal is "Dolby Atmos" format�