17
Remote Controller—Continued
For detailed information, see the pages in parentheses.
a Standby button (47)
Sets the AV receiver to Standby.
b On button (47)
Turns on the AV receiver.
c Input Selector buttons (66)
Used to select the input source.
d Macro buttons (152)
Used with the Macro function.
e Dimmer button (67)
Adjusts the display brightness.
f Arrow [q]/[w]/[e]/[r] and Enter buttons
Used to select and adjust settings.
g CH +/– button (71)
Selects radio presets.
h Setup button
Used to change settings.
i Display button (68)
Displays information about the current input source.
j Listening Mode buttons (92)
Used to select the listening modes. The [Stereo],
[Surround], and Listening Mode [e]/[r] buttons
can be used at any time, regardless of the currently
selected remote controller mode.
k Test Tone, CH Sel, Level–, and Level+
buttons (67, 110)
Used to adjust the level of each speaker.
l Light button
Turns the remote controller’s illuminated buttons on
or off.
m D.TUN button (70)
Selects the Direct tuning mode for radio.
n Remote Mode buttons (16)
Used to select the remote controller modes. When
you press a button, the Remote Mode button for the
currently selected mode lights up.
o Sleep button (68)
Used with the Sleep function.
p VOL [q]/[w] button (66)
Adjusts the volume of the AV receiver regardless of
the currently selected remote controller mode.
q Return button
Returns to the previous display when changing set-
tings.
r Muting button (67)
Mutes or unmutes the AV receiver.
s Re-EQ button (118)
Turns the Re-EQ function on or off.
t L Night button (119)
Turns the Late Night function on or off.
u Audio Sel button (130)
Selects the audio input: analog, digital, HDMI, or
multichannel.
■ TAPE mode
On twin cassette decks, only Deck B can be controlled.
1 Previous and Next [7]/[6] buttons
The Previous [7] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [6] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [7]/[6] buttons may not work prop-
erly with some cassette tapes.
Play [1] button
Starts playback.
Rewind and Fast Forward [5]/[4]
buttons
The Rewind [5] button starts rewind. The Fast
Forward [4] button starts fast forward.
Reverse Play [t] button
Starts reverse playback.
Stop [2] button
Stops playback.
Rec [y] button
Starts recording.
To Next Page
Loading...
Need help?
General
