EasyManua.ls Logo

Integra RDC-7.1 - Page 81

Integra RDC-7.1
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
Operations
Connecting Net Audio Other than USA, Canada, and Australian models
—Continued
Presetting Internet Radio Stations
You can preset up to 30 Internet radio stations.
Choosing a Preset Internet Radio Station
Erasing a preset Internet radio station
7
Press the [Enter] button.
Buffering starts with the following mes-
sage displayed.
When the buffering is complete, the
RDC-7.1 starts playback of the broad-
cast.
Note:
If you’re using a narrowband Internet
connection (e.g., 56K modem, ISDN),
depending on the station, Internet radio
may not work satisfactorily. For best
results use a broadband connection (e.g.,
cable modem, xDSL modem, etc.).
You can switch the displayed content
using the [ ]/[ ] buttons.
After the switch operation, the display
mode appears for 3 seconds, and then
the appropriate information scrolls.
If there is no information on title or art-
ist, “No Info” appears.
When using the OSD screen, all the
information is displayed on one screen
without scrolling.
1
Receive your desired station.
2
Press the [ ] button.
The RDC-7.1 enters into preset mode;
the currently selected preset number
blinks for 5 seconds.
Enter
iNet Radio Station ONK
7ch
Title:
Station ONK Live
Program:
Station ONK Live
Artist:
RealOnkyoNet.com
Data:
WMA 20kbps
Tuned
OSD
Display
Enter
ch
Preset number
3
Press the [Enter] button.
The preset is now complete.
1
While neither the [Input] button
nor [Mode] button is illuminated,
roll the scroll wheel to select IRD
(Internet Radio).
2
Use the remote controllers
[CH Disc +/] button to select the
preset.
When you choose a preset station, the
station name is displayed for 5 seconds,
and then the progress of buffering is dis-
played instead.
When the progress of buffering reaches
100%, you will be presented with the
playing screen.
1
Select the station to erase, follow-
ing the instructions described
above.
2
Press the [ ] button.
The RDC-7.1 enters into preset erase
mode.
3
Press the [Enter] button.
Your selected station is erased.
Enter
CH
Disc
+
-
Enter
ch
Enter

Table of Contents

Other manuals for Integra RDC-7.1

Related product manuals