Intelbras AMT 2018 E - Page 39

39
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 510 + ENTER 8 + ENTER
Note:
» Enables the xation of triggered events to
be cleared even when the system is activa-
ted by Remote Control.
» Factory Default: Disabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 516 + ENTER 3 + ENTER
Note:
» The siren will emit 1 beep upon activation
and 2 beeps upon deactivation by Remote
Control only.
» Factory Default: Enabled.
ENTER + 516 + ENTER 4 + ENTER
Note:
» The siren will emit 1 beep upon activation and
2 beeps upon deactivation by Keyboard only.
» Factory Default: Enabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 511 + ENTER 1 + ENTER
Note:
» Pressing the 0 key for 3 seconds will generate
the silent panic event.
» Factory Default: Disabled.
ENTER + 511 + ENTER 2 + ENTER
Note:
» Pressing Key 2 for 3 seconds will generate the
audible panic event.
» Factory Default: Disabled.
ENTER + 511 + ENTER 3 + ENTER
Note:
» Pressing the 5 key for 3 seconds will generate
the medical emergency event.
» Factory Default: Disabled.
ENTER + 511 + ENTER 4 + ENTER
Note:
» Pressing the 8 key for 3 seconds will generate
the re event.
» Factory Default: Disabled .
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 511 + ENTER 5 + ENTER
Note:
» Pressing the 3 key for 3 seconds will genera-
te the maintenance event.
» Factory Default: Disabled.
ENTER + 511 + ENTER 6 + ENTER
Note:
» The keyboard display backlight will always
stay on.
» Factory Default: Disabled.
ENTER + 511 + ENTER 7 + ENTER
Note:
» If the functions Trouble indication by siren
and Siren beep on Activation/Deactivation
are enabled. If any trouble is detected, 4
short beeps will be emitted upon activation
and 2 short beeps will be emitted upon
deactivation.
» Factory Default: Disabled.
ENTER + 511 + ENTER 8 + ENTER
Note:
» The cancellation becomes by the number of
times the zone is opened.
» Factory Default: Enabled.