Repacking for Shipment
Be sure all parts are back in place before packing the robot.
When repacking the robot for shipping, bolt the flange and base to the metal
plate. Failure to do so may result in irreversible damage to the arm, particularly
to the Harmonic Drive transmissions. Also be sure to secure the cables around the
foam spool.
The robot should be repacked in its original packaging for transport.
If the original carton is not available, wrap the robot in plastic or heavy paper. Put
the wrapped robot in a strong cardboard box at least 15 cm (about 6 inches)
longer in all three dimensions than the robot. Fill the box equally around the unit
with resilient packing material (shredded paper, bubble pack, expanded foam
chunks).
Seal the carton with sealing or strapping tape. Do not use cellophane or
masking tape.
User’s Manual 1 - 3 SCORBOT-ER IX
9603
To Next Page
Loading...