109
REMOTE ACCESS (WEB M&C)
Introduction
With embedded Web M&C (Monitoring and Control) function, the v-Series can be
monitored, controlled, and diagnosed remotely from anywhere, anytime through
the TCP/IP protocol. This not only can save time but also save the cost generated
from the hundreds of routine maintenance activities such as operating rmware
upgrades, tracking parameters resets, and system diagnostic.
How to access Web M&C:
1. Connect an Ethernet Cable between your PC and the Management Ethernet Port.
2. Enter the ACU's IP address (192.168.2.1) into your web browser's address bar to
login into the ACU’s internal HTML page, if this system has not been changed from
the ACU’s factory default. See page 36 for details.
NOTE: Web M&C can be displayed in Internet Explorer 7 or later and is also compatible
with Firefox and Chrome web browser.
To Next Page
Loading...
Need help?
General
