Intellian v100GX User Manual

v100GX – Marine Satellite Communication System
110
Page Login
1. Choose either to Control & Monitor the ACU (Control & Monitoring) or Only
Monitor the ACU (Monitoring Only).
2. Log into the ACU by typing in User Name and Password information. If this
system has not been changed from the factory default:
tUser Name: intellian
tPassword: 12345678
WARNING: The Control & Monitoring Mode will be switched to the Monitoring
Only Mode in the following cases;
t*G1$4PGUXBSF"QUVTJTDPOOFDUFEVTJOH5$1*1$PNNVOJDBUJPOXIJMF
Web M&C Control is in use.
t*G8FC.$$POUSPM.POJUPSJOH.PEFJTBDDFTTFEXIJMF1$4PGUXBSF
is running via TCP/IP Communication. In this case, the web page
will display a pop-up message asking if you want to disconnect the PC
Software network connection. If you select ‘No’, the Control & Monitoring
Mode will be switched to the Monitoring Only Mode.
Main Page

Intellian v100GX Specifications

General

Brand	Intellian
Model	v100GX
Category	Antenna
Language	English