Intellian v100GX - Ship Gyro Connection

v100GX – Marine Satellite Communication System
34
Ship's Gyro Connection
Connecting the System with a Ship’s Gyrocompass
The ship’s gyrocompass provides true heading input to the antenna which easily
allows the antenna to target and acquire the desired satellite. Intellian always
recommends to connect a ship’s gyro to the antenna through the gyro interface on
the ACU. If the ship’s gyrocompass output is other than NMEA 0183 and NMEA
2000, separate purchase of a gyro converter is required.
t/.&"(ZSP$PNQBTT*OUFSGBDF$BCMF$VTUPNFSTVQQMJFE
t5ZQFDPOEVDUPSTGPS/.&"
t/.&"IFBEJOHTFOUFODFYY)%5#BVE/
If there is no HDT sentence then use HDM sentence instead.
t/.&"IFBEJOH1(//VNCFS7FTTFM)FBEJOH
Ship’s Gyro Connection
Strip the cable for 5 mm (0.2")
Do not solder the cable