49
OPERATING THE ACU
8.Touch RIGHT arrow key to display the USB FUNCTION*
This menu will be displayed automatically if a USB ash drive is plugged into the USB port
located in the front panel of the ACU.
USB FUNCTION*
tUPGRADE FIRMWARE: upgrade the system by using the rmware les
(les format: *.FWP) from the specied folder in the USB ash drive.
tCOPY LOG DATA: Copy the up-to-date log data from the system to the USB ash drive.
Select
USB
functions
[USB FUNCTION] SELECT USB FUNCTION
UPGRADE FIRMWARE
USB
To Next Page
Loading...
