Intellian v100GX - Page 98

v100GX – Marine Satellite Communication System
98
- DVB and NBD Tracking Transponder: sets tracking transponder
information for either DVB tracking mode (Verication Type, Frequency, Symbol
rate, and NID) or NBD tracking mode (Frequency and bandwidth).
NOTE: DVB and NBD parameter settings should only be changed by an authorized
service technician. Improper setting of these parameters will render your system
inoperable. Consult Intellian for changing antenna parameters.
- LNB Local Frequency: Displays or sets LNB local frequency and its corre-
sponding LNB voltage supplied. You may select pre-programmed LNB LO settings
from the drop down list. This procedure is same for both the Intellian Global VSAT
PLL LNB and any other LNB.
- Satellite Library: Selecting “Library” option on top of the Satellite screen en-
ables “Add Satellite”, “Edit Satellite” and “Delete Satellite” buttons.
· Open from PC : opens the satellite library le (File format:*.ilf)
from the PC.
· Get Data From ACU: obtains the satellite information from the ACU.
· Load Satellite: uploads the satellite information to the ACU.
· Upload to ACU: uploads the satellite library to ACU.
· Edit Satellite: edits the satellite information of the selected
satellite.
· Add Satellite: adds the satellite information as dened in the
current settings.
· Delete Satellite: deletes the selected satellite from the library.
· Save to PC: saves the current library settings to PC.
NOTE: It is required to click the "Save to PC" button after "Edit Satellite", “Add Satellite",
or "Delete Satellite" button is clicked.