66
v60E - Maritime VSAT Antenna System
iARM Upgrade Procedures:
1. Browse and select the iARM rmware le (.tgz) that you wish to upgrade. Click on Start Update button
to update the iARM rmware. Wait until the page is loaded.
1
2
NOTE
If you select the box "Ignore warnings during installation and force the installation to
continue", warning messages do not appear during the upgrade.
2. Once the update starts, the update process will be displayed on the screen. It will take about two
minutes to complete the rmware upgrade.
WARNING
Do not turn off the device power if the rmware upgrade page is displayed. Failure to comply
may lead to damage and/or malfunction of the system.
3. Once the upgrade is completed, the iARM module will automatically reboot in 10 seconds.
To Next Page
Loading...
Need help?
General
