AT235 Instructions for Use - EN Page 5
2 Unpacking and Installation
2.1 Unpacking and Inspection
Check box and contents for damage
When the instrument is received please check the shipping box for rough handling and damage. If the box is
damaged it should be kept until the contents of the shipment have been checked mechanically and
electrically. If the instrument is faulty please contact your local distributor. Keep the shipping material for the
carrier’s inspection and insurance claim.
Keep carton for future shipment
AT235 comes in its own shipping carton, which is specially designed for the AT235. Please keep this carton.
It will be needed if the instrument has to be returned for service.
If service is required please contact your local distributor.
Reporting Imperfections
Inspect before connection
Prior to connecting the product it should once more be inspected for damage. All of the cabinet and the
accessories should be checked visually for scratches and missing parts.
Report immediately any faults
Any missing part or malfunction should be reported immediately to the supplier of the instrument together
with the invoice, serial number, and a detailed report of the problem. In the back of this manual you will find a
"Return Report" where you can describe the problem.
Please use the "Return Report"
Use of the return report provides the service engineer with the relevant information to investigate the
reported issue. Without this information, there may be difficulty in determining the fault and repairing the
device. Please always return the device with a completed Return Report in order to guarantee that correction
of the problem will be to your satisfaction.
Use only specified power supply unit UE60 type
To Next Page
Loading...
Need help?
General
