AT235 Instructions for Use - EN Page 6
2.2 Markings
The following markings can be found on the instrument:
Patient applied parts that are not conductive and can be immediately
released from the patient.
Refer to instruction manual
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling.
The CE-mark indicates that Interacoustics A/S meets the requirements of
Annex II of the Medical Device Directive 93/42/EEC. TÜV Product Service,
Identification No. 0123, has approved the quality system.
Do not re-use Parts like ear-tips and similar are for single use only
Display Port Connection – HDMI type
To Next Page
Loading...
