AT235 Instructions for Use - EN Page 26
3.5.8 Save
Press “Save” (17) to enter the save screen.
Use the wheel (19) to select a client from the list and press “Enter” (22) or press “Save” (13) to confirm that
data must be saved for the selected client. Before saving the session you may edit an existing client or
create a new client by pressing the Edit button (5) or the New button (6). The process of entering client
details is as follows:
Use the wheel (19) to scroll and use “Enter” (22) to select numbers to be inserted for the client ID. Press the
“Next” button (13) to proceed.
Use the wheel (19) to scroll and use “Enter” (22) to select letter to be inserted for the client’s first name. A
clear, backspace, shift, caps lock and spacebar function are found under the soft key buttons (4 to 8). Press
the “Next” button (13) to proceed.
Use the wheel (19) to scroll and use “Enter” (22) to select letter to be inserted for the client’s last name. A
clear, backspace, shift, caps lock and spacebar function are found under the soft key buttons (4 to 8). Press
the “Done” button (13) to proceed.
To Next Page
Loading...
