Interacoustics AT235 - Operating in Sync Mode (Only with Diagnostic Suite); PC Power Configuration; Starting from Otoaccess

AT235 Instructions for Use - EN Page 28
3.6 Operating in Sync Mode (only with Diagnostic Suite)
NOTICE
3.6.1 PC Power Configuration
Allowing the PC to go into sleep mode or hibernation may cause the Suite to crash when the PC wakes up
again. From the Start menu of your operating system, go to the Control Panel | Power Options to change
these settings.
3.6.2 Starting from OtoAccess™
To start the Diagnostic Suite from OtoAccess™:
1.
Open OtoAccess™.
2.
Select the patient you want to work with by highlighting it blue.
3.
If the patient is not yet listed:
-
press the New client button
-
fill in at least the mandatory fields, marked with a red asterisk
-
save the patient details by pressing the Save patient information button
4.
Double click on the Diagnostic Suite in the Select Instrument box.
For further instructions about working with the database, please see the operation manual for OtoAccess™.