10
Although the Standby button affects system power management, it is not an “on or off”
power switch in the traditional sense. The Standby button is a momentary contact switch,
changing system states based upon the length of time the button is pressed. Depending on
the operating system running and the system’s current power state, you can use the Standby
button to start, suspend, wake up, or power down the system.
See Chapter 2, “Setting Up the Software,” before using the Standby button to start the system
for the first time. See Chapter 4, “Operating Notes,” for detailed information on using the
Standby button.
What’s Next?
Intergraph Computer Systems installs the operating system through Phase I of the process.
From here, continue the installation.
See Chapter 2, “Setting Up the Software,” for instructions on setting up the operating system
and associated system software.
To Next Page
Loading...
