12
Preparing for System Software Setup
Your system’s primary system disk drive and any additional disk drives were formatted and
partitioned before shipment. In Explorer or My Computer, you can right-click a disk drive
and click Properties to display the drive’s partition size and file system format. To view
partition and format information for all disk drives, you can use Disk Administrator on a
Windows NT system or the fdisk command on a Windows 95 or Windows 98 system. See
the operating system documentation and Help for more information on these tools.
The operating system and associated system software is pre-installed on the primary hard
disk drive. Intergraph Computer Systems installed the following system software:
u
Driver software for the mouse
u
Driver software for the installed video display adapter
u
Driver software for the installed sound adapter
u
Driver software for the installed SCSI adapter (optional)
u
Driver software for the installed networking adapter (optional)
u
Core networking software and the NetBEUI protocol (Windows NT)
u
Service Pack software (Windows NT)
u
Quick-Fix Engineering (QFE) software (fixes for operating system problems or
limitations), if needed
u
InterSite software
Intergraph Computer Systems installs the operating system through Phase I of the process.
You must follow the operating system Setup process to prepare Microsoft Windows NT,
Microsoft Windows 95, or Windows 98 for use. Before you go through Setup, have the
following documents available:
u
Microsoft’s Start Here (for Windows NT) or Welcome to Windows 95 or Welcome to
Windows 98.
u
Documents delivered with any expansion cards or additional peripheral devices
purchased from Intergraph Computer Systems
To Next Page
Loading...
