59
Parallel Port IRQ
The settings are 5 and 7. The Optimal default setting is 7.
Parallel Port DMA Channel
The Optimal default setting is N/A.
Onboard IDE
This option specifies the IDE channel used by the on-board IDE controller. The settings are
Disabled, Primary, Secondary, and Both. The Optimal and Fail-Safe default setting is Both.
Auto-Detect Hard Disks
This option detects hard disk drives attached to each IDE channel and sets their parameters
automatically.
Change Supervisor Password
This option lets the user set a password which limits changes to specific BIOS parameters to
those made by the Supervisor.
Change User Password
This option lets the user set a password which limits changes to specific BIOS parameters to
those made by an authorized User (or Supervisor).
Change Language Setting
This option lets the user set the language used in BIOS Setup.
Auto Configuration with Optimal Settings
The Optimal default values provide optimum performance settings for all devices and system
features.
To Next Page
Loading...
