45
Pri (Master/Slave) ARMD Emulated as
Sec (Master/Slave) ARMD Emulated as
The settings are Auto, Floppy, and Hard Disk. The Optimal default setting is Auto.
1st Boot Device
This option sets the type of device for the second boot drives that the BIOS attempts to boot
from after POST completes. The settings are Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd
IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD, Atapi CD-ROM, SCSI, and
Network. The Optimal default setting is Floppy.
2nd Boot Device
This option sets the type of device for the second boot drives that the BIOS attempts to boot
from after POST completes. The settings are Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd
IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD, Atapi CD-ROM, and SCSI.
The Optimal default setting is 1st IDE-HDD.
3rd Boot Device
This option sets the type of device for the second boot drives that the BIOS attempts to boot
from after POST completes. The settings are Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd
IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD, and Atapi CD-ROM. The
Optimal default setting is Atapi CD-ROM.
Try Other Boot Devices
The Optimal default setting is Yes.
Initial Display Mode
The Optimal default setting is Silent; the other setting is BIOS.
Floppy Access Control
The Optimal default setting is Read-Write.
Hard Disk Access Control
The Optimal default setting is Read-Write.
To Next Page
Loading...
