57
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved memory area. The
specified ROM memory area is reserved for use by legacy ISA adapter cards. This option is
disabled if the Reserved Memory Size option is set to Disabled. The Optimal default setting
is C8000.
PCI Device Search Order
The settings are First - Last and Last - First. The Optimal default setting is First - Last.
BIOS Devnode for Shadow RAM
The Optimal default setting is Disabled.
Peripheral Setup
Power Interruption
The Optimal default setting is Enabled.
Onboard FDC
Set this option to Enabled to enable the floppy drive controller on the motherboard. The
settings are Auto (the BIOS automatically determines if the floppy controller should be
enabled), Enabled, and Disabled. The Optimal default setting is Auto.
Onboard Serial Port1
This option specifies the base I/O port address of serial port 1. The settings are Auto (the
BIOS automatically determines the correct base I/O port address), Disabled, 3F8h, 2F8h,
2E8h, and 3E8h. The Optimal default setting is 3F8h.
Onboard Serial Port2
This option specifies the base I/O port address of serial port 2. The settings are Auto (the
BIOS automatically determines the correct base I/O port address), Disabled, 3F8h, 2F8h,
2E8h, and 3E8h. The Optimal default setting is 2F8h.
To Next Page
Loading...
