EasyManua.ls Logo

Interlogix TruVision DVR 12 - Page 70

Interlogix TruVision DVR 12
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 9: Live view
64 TruVision DVR 12 User Manual
Figure 16: Quick access toolbar
Table 10: Description of the quick access toolbar icons
Icon Description
Freeze: Freeze the live image of the selected camera. Although the image
pauses, time and date information does not. The system clock continues to run.
Manual Recording: Start/stop manual recording.
The icon is red when manual recording is enabled. See Error! Reference
source not found.Error! Bookmark not defined. for information on setting
up this function.
Instant playback: Playback the recorded video from the last five minutes. If no
recording is found, then there was no recording made in the last five minutes.
Click the icon and select the desired camera. Click OK.
See “Instant playback” on page 83 for more information.
Audio: Enable/Disable audio output. The audio option must already have been
setup in the Display menu.
Quick snapshot: Capture a snapshot of a video image. The image is saved on
the unit. See “Slideshow of snapshots” on page 88 for more information.
PTZ control: Enter PTZ control mode.
SeeConfiguring PTZ settings” on page 73 for more information.
Digital zoom: Enter digital zoom. See “Digital zoomon page 65 for further
information.
Image settings: Enter the image settings menu to modify the image lighting
levels. There are two options:
Preset Mode: These are preconfigured image lighting levels. Select one of the
four options depending on current lighting conditions:
- Standard: Use in standard lighting situations.
- Indoor: Use indoors.
- Dim Light: Use when the light level is low.
- Outdoor: Use when outdoors. The contrast and saturation values are
high.
Customize: Modify brightness, contrast, saturation, and hue values. Click
Restore to restore image settings to previous values.
Click Restore to restore image settings to previous values. Click Default to
return to default values.
These settings can also be modified from the Camera>Image menu (see page
Adjusting video image settingson page 107.
Text show: Display inserted text on screen. The color of the text can be
changed: Black, white, or pink.
Close toolbar: Close the shortcut toolbar.

Table of Contents

Related product manuals