Interlogix TruVision - Chapter 2 Physical Installation

6 Installation Guide
• Foam pad
(Place it at the top of the
housing where the
harness exits).
• Desiccant 1
(Two small bags. Used
as the spare desiccant
for the PTZ dome. To
use this desiccant,
place it inside the cup
base and tie it with the
zip tie below.)
• Desiccant 2
(One large bag. Used to
keep the two bags of
desiccant away from
moisture prior to use).
• Zip tie (X2)
(Used to tie the
desiccant 1 bags
inside the PTZ dome)
• Wrench (T20)
• Safety lanyard