Installation Guide 37
IR illuminators
The IR PTZ dome camera’s built-in IR illumination provides
high-quality video in low-light environments, even when there
is no other illumination available.
You can configure the IR illumination using the OSD menu or
a recorder such as TVN and TVR. If the function is enabled,
the IR light is ON when the camera enters night (black and
white) mode. If disabled, the IR light is always OFF.
The visible IR range may vary due to multiple factors such as
weather, IR reflection level of objects in the frame, lens
adjustment, and camera settings. Please refer to the camera
datasheet for the standard IR range.
Note: Avoid installing the IR camera in close proximity to a
solid object, such as a tree or wall. The reflection will cause
over-exposure and loss of detail in the field of view.
Mounting the outdoor HD-TVI PTZ dome
Mount the bracket on the wall
Wall mounting is suitable for indoor/outdoor solid wall
construction. The following requirements are mandatory
preconditions for wall mounting:
The wall must be thick enough to install the expansion
screws.
Please ensure that the wall is strong enough to withstand
more than eight times the weight of the dome and bracket.
To mount the bracket:
1. Remove the rubber plugs on the two sides of the PTZ
housing.
To Next Page
Loading...
Need help?
General
