92 xGen Installation & Programming Guide
5. Edit IP settings for the xGen panel, if DHCP is enabled on the xGen and a
DHCP server is available, then this screen will automatically be filled in.
• Require SSL – should not be used.
• Enable Clock Updates – will keep the time and date correct using the
provided Internet Time Server, no manual adjustment will be needed when
daylight savings occurs provided the time zone is set correctly in System.
• Monitor LAN – this will monitor the physical LAN connection and report
communication fail if the cable is disrupted.
6. Click Ethernet and enter settings if required.
To Next Page
Loading...
Need help?
General
