Intermec EasyCoder PF2i User Manual (English)

Other manuals for Intermec EasyCoder PF2i

User Guide174 pages

Service Manual270 pages

Installation Instructions72 pages

Spare Parts54 pages

Safety Instructions24 pages

Supplementary Guide4 pages

Questions and Answers:

P
payneoliviaAug 20, 2025
What to do if the media feed is not working properly on my Intermec Barcode Reader?
- N
  nicole44Aug 20, 2025
  If your Intermec Barcode Reader's media feed isn't working properly, there are several things you can check. If you've changed the media characteristics, perform a TEST-FEED. Ensure that the start- and stop adjust values, Media Type parameter and LSS position are correct; check and change them if necessary. Clean the media guides to remove any dirt from the sensors. If the sensors are faulty, they will need to be replaced.
T
Tracy LittleAug 23, 2025
Why is there excessive bleeding when printing with my Intermec Barcode Reader?
- D
  Donna TorresAug 23, 2025
  If your Intermec Barcode Reader is experiencing excessive bleeding, it could be due to several reasons. You might be using the wrong paper type, so try changing the parameter. The contrast value could be set too high, so adjust the parameter accordingly. The printhead pressure might also be too high; in this case, you should adjust it. A faulty energy control could also be the cause, requiring replacement of the CPU board.
E
Elizabeth HallAug 26, 2025
Why does the transfer ribbon break on my Intermec Barcode Reader?
- S
  Sheryl HawkinsAug 26, 2025
  If the transfer ribbon on your Intermec Barcode Reader is breaking, make sure it is correctly fitted by reloading the ribbon. Check the paper type parameter, change it if necessary, and then clean the printhead. Bad energy control could also cause this issue, so try to adjust it.
K
Kristina PenaAug 28, 2025
How to remove dark lines along the media path from Intermec Barcode Reader printouts?
- B
  Bryce BaileyAug 28, 2025
  If you're getting dark lines along the media path on your Intermec Barcode Reader's printouts, it's likely due to foreign objects on the printhead. Clean the printhead to resolve this issue.
J
jason54Aug 31, 2025
What causes printout missing along inner edge on Intermec Barcode Reader?
- M
  Mary DunnAug 31, 2025
  If your Intermec Barcode Reader is producing a printout missing along the inner edge, it could be due to bad media alignment, so adjust it. Ensure that if you are using a small core & supply post, it is in the lower position. Also, the X-start parameter value might be too low, so increase it.
B
Brian MitchellSep 3, 2025
Why is the transfer ribbon wrinkling in my Intermec Barcode Reader?
- D
  danielssherrySep 3, 2025
  If the transfer ribbon wrinkles when using your Intermec Barcode Reader, it may be due to a faulty ribbon break shaft adjustment, so adjust it. Incorrect edge guide adjustment can also cause this, so adjust the edge guide. Also, too strong printhead pressure may be the cause, so adjust the printhead pressure.
J
Jacob MackSep 5, 2025
What to do if there is no thermal transfer printout from my Intermec Barcode Reader?
- H
  hilljustinSep 5, 2025
  If your Intermec Barcode Reader is not producing any thermal transfer printout, make sure the ink-coated side of the ribbon faces the media by reloading the ribbon.
G
Gabriela KelleySep 8, 2025
Why is the text or bar code compressed on my Intermec Barcode Reader's printouts?
- S
  selenaarnoldSep 8, 2025
  If your Intermec Barcode Reader is printing compressed text or barcodes, the print speed might be too high for the large media roll. Try lowering the print speed.

Intermec EasyCoder PF2i Specifications

General

Category	Printer Accessories
Weight	5.5 lbs (2.5 kg)
Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi
Media Type	Labels, Tags
Ribbon Width	1.0 in (25.4 mm) to 4.3 in (110 mm)
Connectivity	Serial
Operating Temperature	+40°F to +104°F (+4°C to +40°C)
Power Supply	100-240 VAC
Function	Printing labels, tags, and tickets
Media Thickness	0.0025 in (0.0635 mm)

Related product manuals

Intermec EasyCoder F4

Intermec EasyCoder PF2i Install Guide

Table of Contents

Other manuals for Intermec EasyCoder PF2i

Questions and Answers:

Intermec EasyCoder PF2i Specifications

Related product manuals