Intermec EasyCoder PF2i Install Guide

Intermec EasyLAN Interface Kit Installation Instructions 17
Chapter 3 — Setup in IPL
On the task bar of the host, click the Start button, click Accessories, and
then click the Command Prompt. In the Command Prompt, type:
arp -s <desired IP address><printer MAC-address>
Example:
While still using the Command Prompt, use ping to make the printer set
the IP address by typing:
ping <IP address>
Example:
Exit the Command Prompt.

Intermec EasyCoder PF2i Specifications

General

Brand	Intermec
Model	EasyCoder PF2i
Category	Printer Accessories
Language	English