Intermec PB50

Chapter 1 — Using the Mobile Printer
10 PB50 and PB51 Mobile Printer User Guide
Dispose of used batteries promptly. Keep away from children.
Installing the Battery
Make sure you fully charge the battery before you use your printer.
You can charge the battery when it is installed in the printer, or using
the AC18 4-bay battery charger.
To install the battery
1 Lay the printer upside-down on a flat surface.
2 Insert the battery with the tab facing away from the front control
panel.
3 Insert the edge of the battery under the lip of the printer and then
push down until you hear the battery latch click.