Intermec PB50

Chapter 2 — Configuring the Mobile Printer
46 PB50 and PB51 Mobile Printer User Guide
6 In the address field, type your printer IP address and press Enter.
The printer home page appears.
7 Click Login and type your administrator name and password.
8 On the printer home page, click Configuration.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see either the Intermec Fingerprint Command
Reference Manual, the Intermec Printer Language (IPL) Command
Reference Manual, the ESC/P Programmer’s Reference Manual, or
SmartSystems online help. You can download these documents from
the Intermec website at www.intermec.com.
Changing Configuration Settings From the
SmartSystems Console
You can use the SmartSystems Console to change configuration
settings on your printer. The printer ships with the SmartSystems
client preloaded. The console is part of SmartSystems Foundation,
and is available from the Intermec website. To download
SmartSystems Foundation, go to
www.intermec.com/products/smrtsysfoundation/index.aspx.