Chapter 1 — Using the Mobile Printer
24 PB50 and PB51 Mobile Printer User Guide
Enhanced Editing Mode: In enhanced editing mode, you see a plus sign (+) and
a right arrow to change the value of numeric settings.
Understanding Error Mode
The printer starts Error mode when it detects an error condition, such
as a low battery or a paper jam. Some error messages appear on the
screen immediately when they occur, such as DOOR OPEN. Other
error messages do not appear until you press the Info button. If there
is more than one error, the errors appear in the order that they
occurred.
Sample Error Mode Screen
If an error message appears, see “Understanding Error Messages”
on page 58 for more information on how to fix the problem.
Understanding Dump Mode
Dump mode can be used to identify simple problems, such as label
alignment. Extended Test mode requires more user interaction and
lets you choose which tests you want the printer to perform.
To start and stop Dump mode
1 Make sure the printer is in Ready mode and is loaded with media.
2 Press and hold the Feed and Standby buttons for about five
seconds, or until the SELECT MEDIA message appears on the
screen.
+
IP ADDRESS:
130.42.240.102
To Next Page
Loading...
