Intermec PB50

Chapter 2 — Configuring the Mobile Printer
32 PB50 and PB51 Mobile Printer User Guide
c Select the following check boxes:
• Send line ends with line feed
• Echo typed characters locally
• Append line feeds to incoming line ends
d Click OK to save and close ASCII Setup.
5 Test your connection by typing one of the following commands in
your communications program window:
• For IPL, hold down Ctrl and type:
b,w,c
• For FingerPrint, type:
FF
and press Enter.
• For ESC/P, press ESC and type:
EZ {AHEAD:10}
The printer feeds a small strip of media.
Connecting the Printer to Your Network
The printer must establish communications with a host that sends
the data to print. The printer has two ways to communicate with a
network:
• Bluetooth radio communications
• 802.11 b/g wireless radio communications
Setting Up Bluetooth Communications
Your mobile printer contains a Bluetooth radio that allows wireless
communications with a remote device from distances up to 100
meters (328 feet) depending on the Bluetooth range capabilities of the
remote device, environmental conditions, and obstructions. For the
Bluetooth-enabled devices to exchange data, both devices must
establish a connection. Bluetooth software is always running in the
background.