Intermec PB50 User Manual

Chapter 1 — Using the Mobile Printer
14 PB50 and PB51 Mobile Printer User Guide
Loading Media
You can use roll or fanfold receipt media with both the PB50 and
PB51 printers. Your printer ships with a small amount of media
loaded, and a test page printed to make sure that the printer works.
The PB50 printer supports self-strip printing applications. For
information on how to correctly load self-strip media, see “To load
media for self-strip printing (PB50 only)” on page 19. For
information on media specifications, see “Specifications” on
page 70.
To load roll media
1 Make sure the printer is in Ready mode.
• If the printer is off or in Standby mode, press the Standby
button.
• If the printer is on, press the soft key (usually the Setup
button) to return to Ready mode.
2 Press the blue media cover release button until the cover releases.

Intermec PB50 Specifications

General

Print Technology	Direct Thermal
Resolution	203 dpi
Print Speed	Up to 4 ips
Media Type	Labels, tags
Connectivity	Bluetooth, USB, Serial
Battery	Lithium-ion
Weight	1.5 lbs
Media Width	50.8 mm (2 in)
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Print Width	4.09 inches