EasyManuals Logo

Intermec PB50 User Manual

Intermec PB50
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
Chapter 3 — Troubleshooting and Maintaining the Mobile Printer
PB50 and PB51 Mobile Printer User Guide 65
Cleaning the Printer
To properly maintain your printer, you must clean it at the
recommended interval. Make sure to clean the following parts:
Printhead
Platen roller
Paper sensors
Tear bar
Printer exterior
Media compartment
To avoid possible personal injury or damage to the printer, never
insert any pointed or sharp objects into the printer.
Use only the cleaning agents specified in this section. Intermec is
not responsible for damage caused by any other cleaning
materials used on this printer. Clean most of the printer with a
cotton swab saturated with alcohol.
Do not clean the linerless platen roller with isopropyl alcohol. It
could damage the surface of the platen roller.

Table of Contents

Other manuals for Intermec PB50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec PB50 and is the answer not in the manual?

Intermec PB50 Specifications

General IconGeneral
Print TechnologyDirect Thermal
Resolution203 dpi
Print SpeedUp to 4 ips
Media TypeLabels, tags
ConnectivityBluetooth, USB, Serial
BatteryLithium-ion
Weight1.5 lbs
Media Width50.8 mm (2 in)
Operating Temperature14°F to 122°F (-10°C to 50°C)
Print Width4.09 inches

Related product manuals