PB50 and PB51 Mobile Printer User Guide iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number
Date Description of Change
008 5/2012
• Updated the manual to include information on
how to load fanfold media.
007 4/2012 These changes were made for the 11.5.0 firmware
release:
• Updated the “Understanding the Printer
Language” section to “Selecting the Printer
Language.”
• Updated “Upgrading the Firmware”
information.
006 9/2011
• Removed information on floodcoated media.
• Added procedure for configuring wireless
network with PrintSet.
005 4/2011
• Added an index.
• Updated black mark sensor information.
004 1/2010
• Updated procedures for upgrading printer
firmware and cleaning the printer.
003 5/2009
• Added information describing the PB51 printer.
• Added changes to the media adjust in the PB50
printer.
002 11/2008 These changes were made for the current release:
• Support for the ESC/P programming language.
• Added the radioless PB50 printer.
• Change to the Ready-to-Work indicator
behavior.
• Added linerless media support.
• New icons for Bluetooth radio and addition of
printhead lifted error message.
• Added of power management options Sleep
Timer and Standby Timer.
To Next Page
Loading...
Need help?
General
