Intermec PM4I Installation Instructions

EasyLAN Wireless Interface Kit Installation Instructions 43
5
Setup in IPL
 is chapter explains how to set up the wireless net-
work communication in printers running IPL v2.40
(or later).  e only requirement on the PC side is a
terminal program that can transmit and receive ASCII
characters on an RS-232 line.  us, this method is
recommended when you do not have the opportunity
to run the Intermec EasyLAN Network Setup wizard,
for example because you use some other operating
system than Windows.
For information on how to set up the network com-
munication in printers running Fingerprint, refer to
Chapter 4.

Intermec PM4I Specifications

General

Print Technology	Direct thermal / Thermal transfer
Resolution	203 dpi
Max Print Width	4.09 inches
Connectivity	USB, Serial, Parallel
Optional Connectivity	Ethernet, Wireless
Memory	16 MB SDRAM, 8 MB Flash
Operating Temperature	+5°C to +40°C (+41°F to +104°F)
Storage Temperature	-20°C to +60°C (-4°F to +140°F)