Interroll RollerDrive EC310 User Manual

23
Version 2.1 (08/2013) en
Translation of the original instructions
RollerDrive EC310
Initial startup and operation
Commissioning
Pre-commissioning checks  Ensure that no objects are in contact with rotating or moving parts.
 Ensure that all bolts are tightened according to the specifications.
 Ensure that there are no additional areas of danger caused by interfaces to
other components.
 Ensure that the wiring is in accordance with the specification and legal
directives.
 Check all protection devices.
 Ensure that no personnel stand in hazardous areas near the conveyor.
Operation
Pre-commissioning checks  Check the RollerDrive for visible damage.
 Check all protection devices.
 Ensure that no personnel stand in hazardous areas near the conveyor.
 Clearly specify and monitor the way goods are placed on the conveyor.
 Ensure that the RollerDrive is not blocked.
Procedure in case of accident or malfunction
 Stop the conveyor at once and ensure that it cannot be started accidentally.
 In case of an accident: Provide first aid and call for emergency assistance.
 Inform responsible persons.
 Have the malfunction repaired by qualified persons.
 Start the conveyor only after this has been approved by qualified persons.
Hint
For information on commissioning, refer to the DriveControl manual or the
manual for your motor control.
Rotating parts and accidental start-up
Risk of crushed fingers
 Do not insert fingers between the RollerDrive and the
round belt, PolyVee belt or roller chain.
 Do not remove the protection device.
 Keep fingers, hair and loose clothing away from the
RollerDrive.
Damage to the motor or the control due to induction
 Do not push items along the roller conveyor by hand.
 Do not spin the RollerDrive manually.
CAUTION
Hint
Ambient conditions during operation see "Technical specifications", page 10

Interroll RollerDrive EC310 Specifications

General

Brand	Interroll
Model	RollerDrive EC310
Category	DC Drives
Language	English