17
Version 2.1 (08/2013) en
Translation of the original instructions
RollerDrive EC310
Transport and storage
Transport
• Every RollerDrive has end-protectors to cover its ends.
Do not stack pallets.
Do not stack more than four cardboard boxes on top of each other.
Check that the RollerDrives are correctly fixed prior to transport.
Avoid serious impacts during transport.
Check every RollerDrive for visible damage after transport.
In the event of damage, take photos of the damaged parts.
Report any damage caused by transport immediately to the transport
company and Interroll to retain the right to claim for compensation.
Do not expose the RollerDrives to serious fluctuations in temperature as this
could lead to condensation.
Storage
Check each RollerDrive for damage after storage.
There is a risk of injury if transported incorrectly
Only qualified and authorized persons should transport
the product.
Follow the instructions below.