Interroll RollerDrive EC310 User Manual

5
Version 2.1 (08/2013) en
Translation of the original instructions
RollerDrive EC310
Safety
Qualified persons
Qualified persons are persons who read and understand the manual and, taking
national regulations into account, can competently execute incidental work.
Only instructed and qualified persons may work with the RollerDrive, taking the
following into account:
• the relevant manuals and diagrams,
• the warning and safety instructions in this manual,
• the system specific regulations and requirements,
• national or local regulations and requirements for safety and accident
prevention.
Dangers
Bodily injury  Maintenance or repair work must only be performed by authorized and
qualified persons in accordance with the applicable regulations.
 Before turning on the RollerDrive, ensure that no unauthorized persons are
near the conveyor.
Electricity
 Only perform installation and maintenance work after you have switched off
the power. Ensure that the RollerDrive cannot be turned on accidentally.
Rotating parts
 Keep your fingers and hair away from moving parts.
 If you have long hair, always wear a hair net.
 Never wear loose clothing.
 Never wear jewelery, such as necklaces or bracelets.
 Wear safety shoes.
Heat
 Do not touch the RollerDrive during operation. With applications with high
switching cycles, the temperature of the tube can reach up to 60 °C (140 °F).
Working environment
 Do not use the RollerDrive in explosive atmospheres.
 Remove equipment or material which is not required from the workspace.
 Wear safety shoes.
 Regulate and monitor careful placement of the goods on the conveyor.
Faults during operation
 Regularly check the RollerDrive for visible damage.
 In case of fumes, unusual noise or blocked or damaged goods, stop the
RollerDrive at once and ensure that the RollerDrive cannot be started
accidentally.
 Contact qualified personnel immediately to find the source of the fault.
 Do not step on the RollerDrive during operation.
Maintenance
 As the product is maintenance free, you only need to check regularly for
visible damages, unusual noise and that the screws and nuts are still
tightened.
 Do not open the RollerDrive.
Accidental start-up
 Make sure that the RollerDrive cannot start up accidentally, particularly during
assembly, maintenance work and in the event of a fault.
Important
The following list provides information about the various types of danger or
damage that may occur while working with the RollerDrive EC310.

Interroll RollerDrive EC310 Specifications

General

Brand	Interroll
Model	RollerDrive EC310
Category	DC Drives
Language	English