Invacare Action3 Junior - Page 36

36
SECTION 6—SEAT-TO-FLOOR HEIGHT
NOTE: In order to obtain the desired front seat to floor height, it will be necessary to
perform one or both of the following:
• Changing the castor size and/or mounting position on the fork, and/or seat angle
Refer to Removing/Installing/Repositioning the Castor Assemblies paragraph.
• Changing the fork size or adding/removing height adjustment spacers. Refer to
Adjusting Forks paragraph.
• Changing the rear wheel size. Refer to Removing/Installing Rear Wheels
paragraph.
• Changing the rear height positioning. Refer to Adjusting Rear Wheel Height
paragraph.
CHANGING SEAT-TO-FLOOR HEIGHT
SEAT ANGLE 1.5°
REAR WHEEL
FRONT CASTOR
SEAT HEIGHT Position 1
Position 2
20” 22” 5”
5”
410 mm
3
4
N/A
3
435 mm
2
3
2
N/A
460 mm
1
2
1
2
SEAT ANGLE 5°
REAR WHEEL
FRONT CASTOR
SEAT HEIGHT Position 1
Position 2
20” 22” 5”
5”
410 mm
4
5
N/A
3
435 mm
3
4
2
N/A
460 mm
2
3
1
2
SEAT ANGLE 8.5°
REAR WHEEL
FRONT CASTOR
SEAT HEIGHT Position 1
Position 2
20” 22” 5”
5”
410 mm
5
N/A
N/A
3
435 mm
4
5
2
N/A
460 mm
3
4
1
2
Front Castor Position 1 Front Castor Position 1
Front Castor Position 2
1
2