Invacare IVC Series User Manual (English)

Questions and Answers:

E
Elijah JensenAug 14, 2025
What to do if the Invacare IVC Full Electric Bed Hi/Lo function does not work?
- G
  goodmanvalerieAug 14, 2025
  If the Hi/Lo function on your Invacare Full Electric Bed isn't working, there are several things to check: * First, ensure the power cord is properly plugged into a functioning power source. * Next, verify the pendant is correctly connected to the junction box and that the pendant cable isn't entangled or pinched. * Check the household fuse or breaker box. Also, inspect the cables to ensure they are not entangled or pinched. If the thermal protection has been activated, allow the bed unit to sit for 30 minutes before trying again. If problems persist with cables, motors, or a broken cable lock, contact your dealer.
E
Edward ObrienAug 17, 2025
What to do if the Invacare IVC bed spring does not stop moving?
- G
  Gabriel YoderAug 17, 2025
  If the bed spring on your Invacare Medical Equipment doesn't stop moving, check the pendant for depressed or stuck buttons. If a button is stuck, contact your dealer for repair.
L
Luis SharpAug 21, 2025
Why Invacare IVC Medical Equipment bed spring does not move?
- S
  Stephanie RichardsonAug 21, 2025
  If the bed spring on your Invacare Medical Equipment isn't moving, it may have reached the end of its stroke. Try operating the opposite button.
C
cchavezAug 25, 2025
What to do if Invacare IVC Medical Equipment Hi/Lo movement does not stop?
- M
  Mr. Jacob Perry DDSAug 25, 2025
  If the Hi/Lo movement on your Invacare Medical Equipment bed doesn't stop, check the cables. If they appear damaged, contact your dealer.
J
Julia DaltonAug 27, 2025
What to do if my Invacare IVC bed does not stay in place?
- B
  booneadamAug 27, 2025
  If your Invacare Medical Equipment bed isn't staying in place, make sure the casters are locked.
A
April BrownAug 30, 2025
What to do if Invacare Medical Equipment bed springs do not move?
- A
  ashley52Aug 31, 2025
  If the bed springs on your Invacare Medical Equipment aren't moving, check the pull tube(s) for binding. If you notice any binding, contact your dealer for repairs.
J
Jason RobertsSep 2, 2025
What to do if pressing function on pendant results in motion other than that intended for Invacare IVC?
- M
  mcarterSep 3, 2025
  If pressing a function on the pendant of your Invacare Medical Equipment results in unintended motion, contact your dealer, as this may indicate incorrect motor cable connections to the junction box.
S
susanstrongSep 6, 2025
What to do if Invacare IVC bed ends move in opposite directions?
- R
  Raymond VargasSep 6, 2025
  If the bed ends on your Invacare Medical Equipment are moving in opposite directions, contact your dealer, as this may indicate the drive shaft is connected to the wrong gear box shaft.
A
Amy SmithSep 9, 2025
Why Invacare IVC Medical Equipment Hi/Lo function does not work?
- J
  janet40Sep 9, 2025
  If the Hi/Lo function on your Invacare Medical Equipment isn't working, contact your dealer. This issue might be due to the crank not being properly installed or the drive shaft being disconnected.