Invacare IVC Series - Operating the Manual Bed

SECTION 2—OPERATION
IVC
™
Bed Series 16 Part No 1114836
FIGURE 2.3 Using the Emergency Crank - Operating Full Electric Bed - Models 5410IVC and
5411IVC
Operating the Manual Bed
NOTE: For this procedure, refer to FIGURE 2.4.
1. Perform one of the following:
• Raise or lower the head section with crank "A"
• Raise or lower the foot section with crank "C".
• For Model 5307IVC only - Raise or lower the entire bed with crank “B”.
2. Test all operating features of the bed.
3. If any problems arise during testing, recheck all mechanical hook ups.
FIGURE 2.4 Operating the Manual Bed - Model 53071IVC
Optional Bed Rails
 WARNING
DO NOT install the optional bed rails without reading and understanding all of the
instructions in the instruction sheet that accompanies the bed rail kit.
NOTE: Link Fabric
not shown.
A - Head Section
B - Entire Bed
C - Foot Section
NOTE: Link Fabric
not shown.
Crank “A”
Crank “B”
Crank “C”