To Next Page
M
Melissa FischerJul 26, 2025
What to do if my Invacare Medical Equipment has a power loss?
- SSusan SmithJul 26, 2025
If your Invacare Medical Equipment loses power and the internal status indicators are off (both red and green), first, check the electrical outlet using a voltmeter to ensure it's working. If not, inspect the home's electrical panel or consult an electrician. Make sure the unit is properly plugged in, avoiding extension cords, and try another outlet or circuit. If the power cord is frayed, reattach it. If the spade is broken or damaged, replace the power cord connectors. If the spade connector is loose or disconnected, reattach the connector. Also, reset the circuit breaker. If it trips immediately, check for shorts in the unit. If it trips again after two hours, there is an internal problem.
General
