inVENTer Connect. - Page 39

39
OPERATION AND SET-UP ON THE CONTROLLER
inVENTer Connect controller platform | Operating instructions
► Press the select key to conrm the se-
lected time setting.

The desired boost time is set for all ventilation
zones of the system,
here e.g. 1 hour.

The zone status (system information) for the current
ventilation zone appears on the display screen.
Here it is ventilation zone 1 (standard zone).

Alternating with the zone status, the remaining
boost time is displayed.
The set boost time is displayed alternately with the
zone status until it expires.
↔