INVENTOR Cool 8000btu User Manual

2. Attach the drain hose clamp (C) to the back panel of the air conditioner near the drain port
(A) with the screw provided.
3. Attach one end of the drain hose (D) to the drain port (A) with the clip (E). Make sure the
hose is fully inserted into the drain port (A).
4. Insert the rubber plug (F) into the other end of the drain hose (D) and secure with clip (E).
5. Snap the free end of the drain hose (D) into the drain hose clamp (C).
13

INVENTOR Cool 8000btu Specifications

General

Model no.	Cool 8000
Refrigerant	R410A (460g)
Timer	1～24 hours
Cooling capacity	8000 BTU/hr 2345watts
Air volume (H/M/L)	3 350X300X250 m /h
Humidity removal capacity	0.75L/hour
Fan speed	3
Power/Ampere consumption for cooling	1130 W/ 4.6A
Power supply	220-240V~. 50Hz
Compressor	rotary
Exhaust pipe	Ø 142x1500mm
Noise Level	56/54/52 dB(A)
Working temperature	o Cooling: 16 ~ 30 C

Weight and Dimensions

Net Weight	24 kgs
Gross Weight	28 kgs
Net Dimension	300x800x355 mm (WxHxD)
Gross Dimension	355x850x565 mm (WxHxD)